![]() You can restrict services and protocols here. Set security zones security-zone trust host-inbound-traffic protocols all Set security zones security-zone trust host-inbound-traffic system-services all Set security zones security-zone trust interfaces ge-0/0/1.0 Set security zones security-zone untrust host-inbound-traffic protocols all Set security zones security-zone untrust host-inbound-traffic system-services all Set interfaces ge-0/0/1 unit 0 family inet address 10.1.1.1/24 Zone configuration: set security zones security-zone untrust interfaces ge-0/0/0.0 Here note that, family mode inet means it’s IPv4, inet6 means IPv6. Offset=0.000, frequency=0.000, jitter=0.002, run show system uptime | match currentĬurrent time: 01:45:53 BDT IP addressing: Status=c035 sync_alarm, sync_unspec, 3 events, event_clock_reset, We can use following commands to verify our ntp. Important: While using the domain name as ntp server, please make sure you have reachbility to that domain and also you have DNS enable. I am from Bangladesh, that’s why my time zone is Asia/Dhaka. Root# set system host-name letsconfig-SRXĬommit Set DNS server on Juniper SRX: set system name-server 8.8.8.8 Enabling SSH on SRX: set system services ssh Setting up ntp and time zone: system time-zone set system ntp server Root# set system login user rajib class super-user authentication plain-text-password ![]() ![]() Configuring root password: root# set system root-authentication plain-text-password Use “commit” command to apply candidate configuration as active configuration. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |